Crossover networks - Eminence PX Crossovers - Eminence PX speaker crossovers for 2-way or 3-way speaker applications

EMINENCE CROSSOVERS

BOARD ONLY CROSSOVERS

LOW PASS CROSSOVERS

Eminence pxb-250

pxb-250

  • Low Pass 250Hz
  • 600 Watts RMS
  • 8 ohms
  • 12dB/octave Butterworth

Item Price: $59.99

Eminence pxb-500

pxb-500

  • Low Pass 500Hz
  • 600 Watts RMS
  • 8 ohms
  • 12dB/octave Butterworth

Item Price: $39.99

HIGH PASS CROSSOVERS

pxb-1K6

  • High Pass 1.6kHz
  • 400 Watts RMS
  • 8 ohms
  • 12dB/octave Butterworth

Item Price: $44.99

Eminence pxb-3k5

pxb-3K5

  • High Pass 3.5kHz
  • 400 Watts RMS
  • 8 ohms
  • 12dB/octave Butterworth

Item Price: $54.99

Eminence pxb-5k0

pxb-5K0

  • High Pass 5.0kHz
  • 400 Watts RMS
  • 8 ohms
  • 12dB/octave Butterworth

No Longer Available

2-WAY CROSSOVERS

Eminence pxb2-1k6

pxb2-1K6

  • 2-Way 1.6kHz
  • 400 Watts RMS
  • 8 ohms
  • LF Slope 12dB/octave Butterworth
  • HF Slope 18dB/octave Butterworth

Item Price: $79.99

pxb2-2k5cx

pxb2-2K5CX

  • NEW 2-Way 2.5kHz
  • 250 Watts RMS
  • 8 ohms
  • LF Slope 12dB/octave Custom
  • HF Slope 12dB/octave Custom
  • Adjustable -3dB For the Highs
  • No Need For An L-Pad
  • Designed To Be Used With Eminence Coaxial Speakers

Item Price: $64.99

Eminence pxb2-3k5

pxb2-3K5

  • 2-Way 3.5kHz
  • 400 Watts RMS
  • 8 ohms
  • LF Slope 12dB/octave Butterworth
  • HF Slope 18dB/octave Butterworth

Item Price: $59.99

3-WAY CROSSOVERS

Eminence pxb3-3k5

pxb3-3K5

  • Eminence PXB3-3k5
  • 3-Way 3.5kHz & 500Hz
  • 400 Watts RMS
  • 8 ohms
  • LF Slope 12dB/octave Butterworth
  • Mid Slope 6dB/octave Butterworth
  • HF Slope 18dB/octave Butterworth

Item Price: $54.99

Eminence pxb3-5k0

pxb3-5K0

  • Eminence PXB3-5k0
  • 3-Way 5.0kHz & 500Hz
  • 400 Watts RMS
  • 8 ohms
  • LF Slope 12dB/octave Butterworth
  • Mid Slope 6dB/octave Butterworth
  • HF Slope 18dB/octave Butterworth

Item Price: $99.99

L-PAD (ATTENUATOR)

Eminence PX-LPadEminence PX-LPad

Eminence PX-LPad

  • Mono L-Pad
  • Rated at 100 watt RMS
  • Keeps a constant 8 ohm impedance
  • Let's you adjust the volume of the tweeter in a speaker system
  • Fits in a round cutout hole like our D028K or D0948K and will not stick out past the plate
  • Can also work going through 3/4" plywood with a hole cutout size of 1.125" to fit the plastic flange depth
  • Flange dimensions: 2.625"H x 2.625"W x 1.125"D
  • Flange shaft: .9375"Deep x 1.125"Round
  • Click here for wiring instructions

Item Price: $34.99

 CROSSOVERS BULBS

px-Bulb

  • Eminence PX-Bulb
  • Protective Aerospace Bulbs
  • For Use With Eminence PX Crossovers
  • Soaks Extra Power From Too Much Power or Feedback, Etc.
  • Dual Bulb Design Helps Give A Milder Compression Which Results In  A Cleaner Sound Then Standard Single Bulbs
  • Lasts Longer Than Most Standard Bulbs

Item Price: $8.99

US Speaker, LLC